Probe-&-Probe-Handler
Reporting-SoftwareTough-Stainless-Steel-Subsea-Unit

PREVIEW of Cygnus FMD System

With over three decades of designing ultrasonic equipment for the offshore and underwater environment, Cygnus fully understands the requirements of the subsea inspection industry.

This entirely new Flooded Member Detector (FMD) combines intelligent, advanced software and electronics with a truly simple to use interface.

The FMD system comprises of three fundamental parts; the probe and probe handler, the subsea electronics unit and the reporting software.

This product is under market testing and is only available on the Pilot Programme. To find out more, click on the Pilot Programme button below.

EASY TO USE

The Cygnus FMD has an innovative probe handling solution which self aligns, ensuring correct contact with the member, even when approached from an angle.

The system also has a contact sensor which will not allow a test to be taken unless the probe is correctly aligned.

The system returns a simple DRY / FLOODED result to the reporting software with results logged at the surface.

 

COST EFFECTIVE

The Cygnus FMD System is owner operated and extremely easy to learn and understand.

Due to its simplicity and innovative fail safe design the FMD system can be used by a range of operators, with varying experience, without the need for external contractors.

 

RUGGED

Available in high grade acetal or stainless steel for the harshest environments.

The FMD equipment is designed to the highest standards, supported by a 3 year warranty.

 

RELIABLE

Cygnus is an ultrasonic specialist. Years of industry experience and design expertise combine to make this system the most advanced, effective and reliable Ultrasonic FMD System available.

  • The purpose-designed algorithm simultaneously uses
    – advanced signal processing
    – an advanced peak detection algorithm
    – low distortion / low noise data acquisition
    to ensure highest level of Probability of Detection (PoD) to eliminate false readings.
  • The system will only take a measurement when the contact sensor detects probe contact, ensuring reliable results every time. The reporting software will indicate at the surface should the probe lose contact during a test.
  • System Test Function ensures the reliability of the system before it is deployed.

 

FMD REPORTING SOFTWARE

  • Used to perform system tests
  • Displays test results
  • Displays A-Scans for verification
  • Indicator shows RED if flooded and GREEN if dry
  • Logs results for offline analysis
  • Reports can be generated and exported to PDF and Excel

 

VERSATILE

The same FMD system is both diver or ROV deployable. Being of a compact design the probe is able to get into to hard to reach areas, such as K-nodes, where other inspection methods cannot. A range of versatile options to suit working depths and varying requirements are available.

Probe 0.5 MHz high power piezo composite probe – single element
Measuring Range 7.87 – 78.74 inch (200 – 2000 mm) member diameter
Resolution 0.039 inch (1 mm)
POWER
Diver Communications PSU 110-240 AC 50/60 Hz @ 1A (max)
ROV Power Supply 12 to 24 volt D.C @ 60mA
COMMUNICATIONS
Digital RS232 & RS485
Baud Rate 115,200
Date Capture On demand 3 shot and varying gain levels
Diver Data Link RS485 half – duplex
ROV Date Link RS232 full – duplex suitable for fibre multiplexers
PHYSICAL
Acetal Electronics Body Weight – (0.9 kg)
Dimensions – 3.74 x 4.53 inch (95 x 115 mm)
Stainless Steel Electronics Body Weight – (4 kg)
Dimensions – 3.74 x 4.53 inch (95 x 115 mm)
Acetal Probe Handler Weight – (2.5 kg)
Dimensions – 5.51 x 6.69 x 5.12 inch (140 x 170 x 130 mm)
Stainless Steel Probe Handler Weight – (4.7 kg)
Dimensions – 5.51 x 6.69 x 5.12 inch (140 x 170 x 130 mm)
120 m Umbilical Cable Weight – (23 kg)
Dimensions – 13.39 x 17.72 x 21.85 inch (340 x 450 x 555 mm)
350 m Umbilical Cable Weight – (87 kg)
Dimensions – 17.72 x 23.62 x 36.61 inch (450 x 600 x 930 mm)
50 m Deck Cable Weight – (13 kg)
Dimensions – 11.42 x 14.96 x 19.29 inch (290 x 380 x 490 mm)
Depth Rating 300 msw
Temperature Operation 32°F to 167°F (0°C to 75°C)
Temperature Storage -40°F to 131°F (-40°C to 55°C)
Subsea Unit
– Tough Stainless Steel or
– Lightweight Acetal
Cable Protector
– Provides extra cable protection and an attachment point for divers
Self Aligning Probe Handler
– Self Aligning Probe Handler
– Tough Stainless Steel or
– Lightweight Acetal
Handle Options
– Diver: Tough Stainless Steel
– Diver: Lightweight Acetal
– ROV: Fishtail or T-Bar
Communications PSU
– Provides power and communications to the diver
Umbilical Cable
– 393.70 inch (120 m) length
– 1148.29 inch (350 m) length
System Test Tank
– Used to run a full system test of the FMD system

Reviews

There are no reviews yet.

Be the first to review “PREVIEW of Cygnus FMD System”

Your email address will not be published. Required fields are marked *

Add a review

12345