Cygnus W1 Probe Handler

Work Class ROV Probe Handler

Rated 5.00 out of 5 based on 1 customer rating

The Cygnus W1 Probe Handler is designed for use on Work Class ROVs. It can be held by a manipulator arm and supplied with either T bar or Fish Tail handles. Constructed from 316 stainless steel throughout, it has a depth rating of 4000 msw.

The Ultrasonic probe alignment is provided by a double jointed coupling that enables 15 degrees of movement in both planes guided by four pins. A shock absorbing spring reduces any impact loading on the unit. The design allows the manipulator arm to present the ultrasonic probe to the surface to be measured. Any misalignment will be taken up by the coupling resulting in less movement of the manipulator arm position.

Ordering Information

When ordering the W1 Probe Handler you must order the appropriate Handle and Probe separately.

Size 6.7” x 6” x 3.5” (170 mm x 150 mm x 90 mm) excluding handle
Weight 11 lbs (5 kg)
Depth Rating 4000 msw
Materials 316 Stainless Steel
Spring Force 33 lbs (15 kg) spring starts to compress
Probe Cable 16 ft (5 m) Double Jacket Coaxial (other lengths at special request)
Warranty (Handler) 3 Years
Warranty (Probe) 6 Months
Part Number 001-8311 W1 Probe Handler
Probe Types 2.25 MHz 1/2″ (13 mm) with membrane
(3.5 MHz and 5 MHz at special request)

1 review for Cygnus W1 Probe Handler

  1. Rated 5 out of 5

    André Lang

    We have used the probe handler W1 on a few projects in the North Sea and Baltic Sea with our ROV Panther XTP and it has proved to be a very useful and productive tool allowing us to carry out a UT reading within seconds whether it was probing a flat surface or a rounded surface, due to its design it is the perfect handle for subsea UT probing.

Add a review

Your email address will not be published. Required fields are marked *

Handle Options

Fishtail Manipulator Handle Part No. 001-8316
¾” T Bar Manipulator Handle Part No. 001-8314

½” T Bar Manipulator Handle Part No. 001-8315

 

Probe Connectors

MCIL2M Probe Connector (for use with Mk5 ROV Gages)
Part No. 001-8318 (2.25MHz 1/2″ (13mm))
Nosecone Probe Connector (for use with Mk4 ROV Gages)
Part No. 001-8317 (2.25 MHz 1/2″ (13mm))
  • Rated 5 out of 5

    André Lang

    We have used the probe handler W1 on a few projects in the North Sea and Baltic Sea with our ROV Panther XTP and it has proved to be a very useful and productive tool allowing us to carry out a UT reading within seconds whether it was probing a flat surface or a rounded surface, due to its design it is the perfect handle for subsea UT probing.

  • Add a review

    12345