信固水下型

Diver-Held Underwater Thickness Gauge

评分 5.00 / 5,已有 1 位顾客进行了评价

信固水下型是潛水员手持型的水下多重波超聲波測厚儀。它是在30年前为進行海底維護和調查的潛水員而設計的……今天,它仍然是行業標準使用的測厚儀。

該裝置的額定深度為300米(1,000英尺),使用“厚塗層”模式(可选配)可透過厚度達20毫米的塗層来测量金屬厚度,并提供準確读数。明亮的LED顯示屏即使在可見性差的情況下也可以輕鬆查观看。

信固水下測厚儀,完整套件都包装在坚固的手提箱,其中帶有2個可充電電池。

信固超仪仅使用真正原装零件和组件(包括Lemo®连接器和Peli®案例)在英国制造所有设备。

特点

  • RINA认证(证书号2009DGPO787)
  • 探头自动识别功能
  • “厚涂层”模式,可测涂层厚度最高达20mm
  • 用方便的按钮就可以轻松校准
  • 坚固、耐用、防震构造
  • 稳定校准—线性准确,无需调零
  • 明亮的LED显示屏,可在视线受限的环境下使用
  • 可承受最深达300米的压力
  • 两个密封环,高度密封
  • 测量自校验功能,保证度数准确
  • 回波强度显示器,以帮助测量
  • 所有的探头都用膜片来保护,以防磨损
  • 多种探头选择
  • 两个可充电的电池组,带充电器
  • 固定式探頭選件,可單手使用
测量物料 声速介于2000 m/s 到 7000 m/s之间的材料——事实上涵盖了所有常用的工程材料
测量范围(钢) 3mm-250mm,用2.25HMz的探头
2mm-150mm,用3.5HMz的探头
1mm-50mm,用5MHz的探头
精确度 0.1mm,需要根据信固公司的校准步骤进行校准
分辨率 0.1mm或者0.05mm(可选)
电源 NiMH可充电电池组
電池壽命 30小时不间断
显示屏 超大超亮的LED液晶屏
尺寸 235 mm x 75 mm
重量 950g-带探头
860g 带固定头探头
操作温度 -10°C 到 +50°C
环境保护 IPX8,可在300米环境下连续放置
遵从标准 CE, 英国标准 BS EN 15317 (超声波测厚仪的特性及鉴定规范)
环境条例 RoHS,遵从WEEE 条例

 

  • 仪器主机
  • 掛繩及 Molykote
  • 两个可充电电池
  • 电池充电器
  • 探头,带有1 m的電纜连接錐型头
  • 水下探头膜片耦合剂
  • Accessories: 备用膜片和密封环; 膜片锁环匙; 15 mm测试钢块; 扭矩桿(“Tommy”); 跨接线

为了使超声波测厚仪具有最佳性能,必须对要测试的特定材料使用合适的探头。以下是可用的探针选项。

单晶软面压缩 6 mm – 5 MHz
13 mm – 2.25, 3.5 or 5 MHz
19 mm – 2.25 MHz

 

信固水下型 有 1 个评价

  1. 评分 5 / 5

    D.Miller

    I received the Cygnus 1 in 1987 and used it continuously for 10 years on submerged pipelines, without any problems. After that period it was mainly used for ship board survey inspections of hull thickness testing which is still in use today with the same set of batteries. I cannot praise this piece of equipment enough as it has given unbeatable service in extremely hostile environments without failing at any time. I would recommend this unit to anyone looking for a reliable ultrasonic thickness testing unit.

显示所有语言的评论 (13)

添加评价

电子邮件地址不会被公开。 必填项已用*标注

岸上显示选项

當需要在表面上驗證讀數時,可以使用岸上显示器。可依客戶需求指定的臍帶電纜長度,最长為1000 m。

共有三個選項:

選項 A:  手持式岸上显示器,大的液晶显示屏,IP65防水防尘密封。

選項 B:  數據記錄和遠程顯示的 Cyglink軟件 (可在Windows 环境中使用)。

信固潜水型水下测厚仪

可腕戴式水下測厚儀也可作為潛水員的替代選擇。欲了解更多信息,請訪問信固潜水型頁面並觀看信固水下超聲測厚儀視頻。

  • 评分 5 / 5

    D.Miller

    I received the Cygnus 1 in 1987 and used it continuously for 10 years on submerged pipelines, without any problems. After that period it was mainly used for ship board survey inspections of hull thickness testing which is still in use today with the same set of batteries. I cannot praise this piece of equipment enough as it has given unbeatable service in extremely hostile environments without failing at any time. I would recommend this unit to anyone looking for a reliable ultrasonic thickness testing unit.

  • 评分 5 / 5

    Anders P.

    Since my purchase of the Cygnus 1 Underwater gauge in 2005, I have had no problem with the gauge, and it’s still going strong after 14 years of use by divers, completing many underwater inspections across countries in Africa and Europe. There were times where it wasn’t easy to get readings on odd surfaces or through small marine growth, but we succeeded eventually.

  • 评分 5 / 5

    Santosh G.

    There are many in the industry who have been using Cygnus meters for more than 20 years. I myself have used their underwater thickness gauge along with regular and Intrinsically Safe UT meters from the early stages of my career – and that goes back to more than 25 years for sure. TechCorr, a global leader of inspection services, uses Cygnus Gauges for pipelines, tanks and vessel inspections. Our operators particularly love Cygnus – as readings come quick and accurate.

  • 添加评论

    12345